Javasript is currently not supported/disabled by this browser. Please enable JavaScript for full functionality.

Roller coverings and printing blankets

Benefits
Guide formulations

very low residue > 40 µm

good mixing and dispersion properties

good rubber-metal adhesive strength

excellent grinding properties

high surface quality

good for laser engraving

low dynamic heat build-up

low compression set

good resistance against solvents, oil, water, acid

Roller Cover / Light-colored

60 Shore A; EPDM; sulfur cure (RRS 22) (RRS 23)
Resistant to animal fat, colophonic acid and offset print colors; 40 Shore A; PNR; sulfur cure (RRS 45)
80 Shore A; EPDM; sulfur cure (RRS 25) (RRS 24)
Rice husking roller; 50 Shore D (97 Shore A); SBR/BR; sulfur cure (M 511.2/14)
Resistant to animal fat, colophonic acid and offset print colors; 30 Shore A; PNR; sulfur cure (RRS 44)
20 Shore A; PNR; sulfur cure (RRS 17)
Antistatic; 55 Shore A; NR/BR; sulfur cure (2828)
Oil resistant; 80 Shore A; NBR; sulfur cure (RRS 26)
45 Shore A; EPDM; sulfur cure (RRS 21)
25/30 Shore A; EPDM; sulfur cure (3118 B15) (3118 B16)
Paper press with high heat conductivity; 90 Shore A; NR; sulfur cure (RRS 27)
Replacement for stone rollers with high heat conductivity; 40 Shore D; SBR/NR; sulfur cure (RRS 28)

Roller Cover / Black

80 Shore A; NR; sulfur cure (AT11/19)

Download all

Recommended Products

Sorted by crosslinking agent.

Name	Short Description
SILLITIN N 85	Standard product.
SILLITIN N 85 puriss	For high requirements for dispersion.
SILLITIN Z 86	Standard product, less wear than Sillitin N 85.
SILLITIN Z 86 puriss	For high requirements for dispersion.
SILFIT Z 91	Same as N 85, puriss but with avoidance of mold fouling caused by filler, greater brightness and color neutrality, less moisture content.

Name	Short Description
AKTISIL AM	Same as Silfit Z 91, but with higher tensile strength, higher tensile modulus, lower compression set, better abrasion resistance, improved chemical resistance, lower dynamic heat build-up.
AKTISIL PF 216	Same as Aktisil AM, but with highest tensile strength and tensile modulus, lowest compression set, best abrasion resistance, best resistance, lowest dynamic heat build-up.
AKTIFIT AM	Same as Aktisil AM, but with lower compression set.

Name	Short Description
AKTISIL VM 56	Same as Sillitin Z 86, but with higher tensile strength, higher tensile modulus and lower compression set, better abrasion resistance, improved chemical resistance, lower dynamic heat build-up.
AKTISIL VM 56/89	Same as Aktisil VM 56, but for greater color neutrality requirements, slightly improved dispersion.
AKTISIL Q	Similar to Aktisil VM 56/89, but with less moisture content, lower viscosity, lower compression set, improved chemical resistance, best product for silicone rubber.
AKTIFIT VM	Same as Silfit Z 91, but with higher tensile strength, higher tensile modulus, lower compression set, better abrasion resistance, improved chemical resistance, lower heat build-up.
AKTIFIT Q	Same as Silfit Z 91, but with higher tensile strength, highest tension value, lowest compression set, better abrasion resistance, improved chemical resistance, lower heat build-up.

Name	Short Description
AKTISIL AM	Same as Silfit Z 91, but with higher tensile strength, higher tensile modulus, lower compression set, best abrasion resistance, improved chemical resistance.
AKTIFIT AM	Same as Aktisil AM, but improved dispersion.

lET'S STAY IN TOUCH

You do not receive any news from HOFFMANN MINERAL yet? We send out a quarterly newsletter with interesting and helpful information.
No spam. Only qualitative content. Promise!

SUBSCRIBE TO NEWSLETTER