- very good extrusion properties
- medium to high tensile strength
- good compressive properties at high temperature
- good hot set properties
- high electrical resistivity, also after immersion in water
- avoidance of deposits on dies caused by filler
- good resistance against oil, water, acid
- very low dielectric loss, also aferter immersion in water, even without additional silane in the compound
Sheathing / Light-colored
- 60 Shore A; EPDM; peroxide cure (3386 K460)
- High tensile strength; 60 Shore A; peroxide cure (K 1322)
- Semko; 65 Shore A; EPDM; peroxide cure (E.1.0.001)
- DIN VDE 0207 3GM2; 75 Shore A; EPDM; peroxide cure (E.1.0.003)
- DIN VDE 0207 EM1; 75 Shore A; EPDM; peroxide cure (E.1.0.004)
- DIN VDE 0207 EM1; 55 Shore A; EPDM; sulfur cure (E.1.0.005)
- DIN VDE 0207 EM1; 70 Shore A; EPDM; sulfur cure (E.1.0.006)
Cable insulation
- 70 Shore A; EPDM; peroxide cure (M 432.0/9) (M 432.0/3) (M 432.0/4) (M 432.0/8)
- Medium and high voltage cable insulation; 85 Shore A; EPDM; peroxide cure (M 613.1/15) (M 613.1/9) (M 613.1/6)
