Sillikolloid P 87 in EPDM profiles, cellular

soft, chemically foamed

Sillikolloid P 87 offers best extrusion quality/edge smoothness of complex profiles even at high extrusion speed and slightly higher tensile strength. 

 

  • good mixing and dispersion properties
  • good extrusions properties
  • high surface quality
  • high electrical resistance
  • cost reduction potential
  • avoid deposits on dies caused by filler
  • lower water absorption (compared with carbon black)
Product characteristics Unit SILLIKOLLOID P 87
Color values L*
Color values a*
Color values b*
94.5
0.9
9.0
Particle size D50
Particle size D97
µm
1.5
6.5
Residue > 40 µm
mg/kg
20
Volatile matter at 105 °C % 0.5
pH Value 8.7
Density
Bulk density
Tamped density
g/cm³
2.6
0.25
0.40
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
14
55
Hardness silica/kaolinite
Abrasivity
mg
7/2.5
25
Refractive index n 1.55
Water solubility
Acid solubility
%
< 0.5
< 1
Chemical Analysis:
SiO2
Al2O3
Fe2O3
%
80
14
< 1
Mineralogical Composition:
Neuburg silica
Kaolinite
Other minerals
%
55
30
5

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products