hard, physically foamed
Tetrasulfan functiionalized based on Sillitin Z 86.
Aktisil PF 216 offers higher tensile strength and lower compression set.
- good mixing and dispersion properties
- good extrusions properties
- high surface quality
- high electrical resistance
- cost reduction potential
- avoid deposits on dies caused by filler
- lower water absorption (compared with carbon black)
| Product characteristics | Unit | Testing method | AKTISIL PF 216 |
|---|---|---|---|
| Functionalization | tetrasulfane | ||
|
Color values L*
Color values a*
Color values b*
|
acc. to CIELAB |
94.0
1.0
10.0
|
|
|
Particle size D50
Particle size D97
|
µm | acc. to ISO 13320-1 |
2.4
12.0
|
|
Residue > 40 µm
|
mg/kg | acc. to DIN EN ISO 787 part 18 |
15
|
| Volatile matter at 105 °C | % | acc. to DIN EN ISO 787 part 2 | 0.3 |
|
Density
Bulk density
|
g/cm³ |
acc. to DIN EN ISO 787 part 10
acc. to DIN ISO 903-1976
|
2.6
0.25
|
|
Spec. Surface area (BET)
Oil absorption
|
m²/g
g/100 g
|
acc. to DIN ISO 9277
acc. to DIN EN ISO 787 part 5
|
10
60
|
| Water absorption | ml/g | acc. to Baumann | ≤ 0.1 |
| hydrophobic | X | ||
| reactive | X |
hard, physically foamed
- Profile, cellular, hard, electrically conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/14)
- Profile, cellular, hard, electrically non-conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/5)
In order to make available to you the most important information about our products at all times, you will find here the Material Specification.
The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.
All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.