Sillitin V 88 in powder coatings

UV-cured

Sillitin V 88 is applicable in UV-cured powder coatings.

excellent dispersion properties

low abrasivity

good edge covering

scratch resistance

abrasion resistance

flexibility (Erichsen cupping, impact)

good corrosion protection, especially low delamination and rust creep

good chemical resistance, especially against hot water

Product characteristics	Unit	Testing method	SILLITIN V 88
Color values L* Color values a* Color values b*		acc. to CIELAB	95.0 0.5 5.0
Particle size D₅₀ Particle size D₉₇	µm	acc. to ISO 13320-1	5.0 18.0
Residue > 40 µm	mg/kg	acc. to DIN EN ISO 787 part 18	30
Volatile matter at 105 °C	%	acc. to DIN EN ISO 787 part 2	0.5
Electrical conductivity	µS/cm	acc. to DIN EN ISO 787 part 14	80
pH Value		acc. to DIN EN ISO 787 part 9	8.7
Density Bulk density Tamped density	g/cm³	acc. to DIN EN ISO 787 part 10 acc. to DIN ISO 903-1976 acc. to DIN EN ISO 787 part 11	2.6 0.35 0.60
Spec. Surface area (BET) Oil absorption	m²/g g/100 g	acc. to DIN ISO 9277 acc. to DIN EN ISO 787 part 5	9 45
Hardness silica/kaolinite Abrasivity	mg	acc. to Mohs acc. to Einlehner	7/2.5 40
Refractive index n		sin α / sin β	1.55
Water solubility Acid solubility	%	acc. to DIN EN ISO 787 part 3 acc. to DIN 53770 (0,1 N HCL)	< 0.5 < 1
Chemical Analysis: SiO₂ Al₂O₃ Fe₂O₃	%	acc. to DIN 51001 (RFA)	88 8 < 1
Mineralogical Composition: Neuburg silica Kaolinite Other minerals	%	Based on X-ray diffraction pattern analysis combined with Rietveld	70 17 5

Material Specification

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

Name	Short Description
SILLITIN N 75	Standard product, low color requirements.
SILLITIN Z 86	Same as Sillitin N 75, but with higher color neutrality, lower abrasivity.
SILLITIN Z 89	Same as Sillitin Z 86, but for brighter coatings.
SILLITIN N 85 puriss	Lower abrasivity.
SILLITIN Z 86 puriss	Same as Sillitin Z 86, but with lower abrasivity.
SILLITIN Z 89 puriss	Same as Sillitin Z 89 , but with lower abrasivity.
SILLIKOLLOID P 87 puriss	Lower abrasivity.
AKTISIL AM	Improved hot water resistance.

Name	Short Description
SILFIT Z 91	For gloss applications, homogeneous and fine structure, improvement of flexibility (impact), improvement of water spot resistance, slight improvement of weather resistance, better corrosion resistance/reduction of delamination.
AKTIFIT PF 115	Same as Silfit Z 91, but for high gloss applications with low haze, all colors except white, improved surface appearance/texture.
SILLITIN V 88	Same as Silfit Z 91, but for semi-gloss applications, all colors except white, improvement of flexibility (impact), slight improvement weather resistance, better corrosion resistance/reduction of delamination.

Name	Short Description
SILFIT Z 91	Partial replacement of titanium dioxide, improved scratch resistance, very good flow performance, outstanding impact with higher dosing, retention of weather resistance and better corrosion resistance in the TGIC system.

Name	Short Description
SILFIT Z 91	According to requirements.
AKTIFIT Q	According to requirements.
AKTISIL MAM	According to requirements.

Sillitin V 88 in powder coatings

UV-cured

Material Specification

Safety Data Sheet

Technical Data Sheet

More recommended Products

Sillitin V 88 in powder coatings

lET'S STAY IN TOUCH