Aktifit PF 115 in coatings, sealants, adhesives, tooling resins

Calcined product, amino functionalized.

Aktifit PF 115 is hydrophobic and offers very low moisture content without increase under humid climatic conditions. According to the polarity of the PU the product shows moderate rheological activity (higher viscosity at low shear rates, yield point, shear thinning).

excellent dispersion properties

selectable rheology (free-flowing to non-sagging)

easy processing

good tensile strength and tear resistance

good elasticity/compression set

good abrasion resistance

good chemical resistance, especially against acids

good water resistance

also suitable for food contact and drinking water applications (as per BfR and FDA regulations)

Product characteristics	Unit	Testing method	AKTIFIT PF 115
Functionalization			amino
Color values L* Color values a* Color values b*		acc. to CIELAB	96.2 - 0.1 1.0
Particle size D₅₀ Particle size D₉₇	µm	acc. to ISO 13320-1	2.3 11.0
Residue > 40 µm	mg/kg	acc. to DIN EN ISO 787 part 18	10
Volatile matter at 105 °C	%	acc. to DIN EN ISO 787 part 2	0.1
Electrical conductivity	µS/cm	acc. to DIN EN ISO 787 part 14	not applicable
Density Bulk density Tamped density	g/cm³	acc. to DIN EN ISO 787 part 10 acc. to DIN ISO 903-1976 acc. to DIN EN ISO 787 part 11	2.6 0.35 0.70
Spec. Surface area (BET) Oil absorption	m²/g g/100 g	acc. to DIN ISO 9277 acc. to DIN EN ISO 787 part 5	9 60
Hardness silica/kaolinite	mg	acc. to Mohs	7/4.5
Refractive index n		sin α / sin β	1.55
Water solubility Acid solubility	%	acc. to DIN EN ISO 787 part 3 acc. to DIN 53770 (0,1 N HCL)	not applicable < 1
Chemical Analysis: SiO₂ Al₂O₃ Fe₂O₃	%	acc. to DIN 51001 (RFA)	86 13 < 1
Mineralogical Composition: Neuburg silica Calcined kaolinite	%	Based on X-ray diffraction pattern analysis combined with Rietveld	60 40
Equilibrium moisture content at 25°C and 50% relative humidity and 80% relative humidity and 90% relative humidity	%	acc. to DIN 66138	0.04 0.06 0.07
Water absorption	ml/g	acc. to Baumann	≤ 0.1
hydrophobic			X
reactive			X

2K polysulfide coating, sprayable lining for concrete, resistant to chemicals, 45 Shore A (V44417.0 [1])

Download all

Material Specification

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

Name	Short Description
SILLITIN Z 86 puriss	Standard product, balanced profile of properties.
SILLITIN Z 89 puriss	Same as Sillitin Z 86 puriss, but also for brighter applications.
SILLITIN Z 86	For lower requirements for dispersion properties.
SILLITIN Z 89	For lower requirements for dispersion properties.
SILLIKOLLOID P 87 puriss	Same as Sillitin Z 86 puriss, but with slightly higher tensile strength and tear resistance, higher viscosity.
AKTISIL AM	Same as Sillitin Z 86, but with better mechanical properties like higher tensile strength, better compression set and abrasion resistance, partly higher adhesive strength and chemical resistance.
AKTISIL PF 777	Same as Sillitin Z 86, but with higher rheological activity, improved water resistance.
SILFIT Z 91	Same as Sillitin Z 89 puriss, but with highest brightness and color neutrality, lower viscosity, faster crosslinking reaction.
AKTIFIT AM	Same as Silfit Z 91, but with better mechanical properties, partly higher adhesive strength and chemical resistance.
AKTIFIT VM	Same as Silfit Z 91, but with improved water resistance.
AKTIFIT Q	Same as Aktifit VM, but with higher polarity through methacrylic groups.
AKTIFIT PF 111	Same as Aktifit VM, but with higher rheological activity.

Aktifit PF 115 in coatings, sealants, adhesives, tooling resins

Material Specification

Safety Data Sheet

More recommended Products

Aktifit PF 115 in coatings, sealants, adhesives, tooling resins

lET'S STAY IN TOUCH