Sillitin V 88 in UV-curing coats

Sillitin V 88 offers low viscosity, good matting effect, good transparency and abrasion resistance.
During excimer curing the product leads to very homogeneous, matt surfaces with high polishing up (burnishing) resistance after scratch test (Martindale).

low sedimentation

no hard sediment

low abrasivity

scratch resistance

abrasion resistance

very good transparency

adjustable matting effect through choise of product

no effect on UV-curing

Product characteristics	Unit	Testing method	SILLITIN V 88
Color values L* Color values a* Color values b*		acc. to CIELAB	95.0 0.5 5.0
Particle size D₅₀ Particle size D₉₇	µm	acc. to ISO 13320-1	5.0 18.0
Residue > 40 µm	mg/kg	acc. to DIN EN ISO 787 part 18	30
Volatile matter at 105 °C	%	acc. to DIN EN ISO 787 part 2	0.5
Electrical conductivity	µS/cm	acc. to DIN EN ISO 787 part 14	80
pH Value		acc. to DIN EN ISO 787 part 9	8.7
Density Bulk density Tamped density	g/cm³	acc. to DIN EN ISO 787 part 10 acc. to DIN ISO 903-1976 acc. to DIN EN ISO 787 part 11	2.6 0.35 0.60
Spec. Surface area (BET) Oil absorption	m²/g g/100 g	acc. to DIN ISO 9277 acc. to DIN EN ISO 787 part 5	9 45
Hardness silica/kaolinite Abrasivity	mg	acc. to Mohs acc. to Einlehner	7/2.5 40
Refractive index n		sin α / sin β	1.55
Water solubility Acid solubility	%	acc. to DIN EN ISO 787 part 3 acc. to DIN 53770 (0,1 N HCL)	< 0.5 < 1
Chemical Analysis: SiO₂ Al₂O₃ Fe₂O₃	%	acc. to DIN 51001 (RFA)	88 8 < 1
Mineralogical Composition: Neuburg silica Kaolinite Other minerals	%	Based on X-ray diffraction pattern analysis combined with Rietveld	70 17 5

UV-curing transparent topcoat for wood, without reactive diluent, matte (L00002.1)

UV clear coat for Excimer curing (RRS 2214)

UV-curing transparent surfacer for wood, without monomeric reactive diluent (I45410.1)

UV-curing soft feel lacquer for wood (FWO 4460-30)

Download all

Material Specification

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

Name	Short Description
AKTISIL MAM	Same as Sillitin V 88, but with improved abrasion resistance, also for excimer curing, less or no polishing up after scratch test.
SILFIT Z 91	Similar to Sillitin V 88, but with highest color neutrality, best dispersion properties, higher viscosity at low shear rates, reduced sedimentation, higher gloss.
SILLITIN Z 89	Same as Sillitin V 88, but with lower color neutrality, higher viscosity, reduced sedimentation, for gloss formulations.
SILLITIN Z 89 puriss	Same as Sillitin Z 89, but with improved dispersion, for gloss formulations.
AKTISIL VM 56/89	Same as Sillitin Z 89, but with improved abrasion resistance.
AKTIFIT VM	Highest color neutrality, best dispersion properties, lower viscosity at low shear rates, improved abrasion resistance, improved hiding power without UV-curing problems.
AKTIFIT Q	Low viscosity, good matting effect, good transparency and abrasion resistance, also for excimer curing.

Sillitin V 88 in UV-curing coats

Material Specification

Safety Data Sheet

Technical Data Sheet

More recommended Products

Sillitin V 88 in UV-curing coats

lET'S STAY IN TOUCH