Aktifit Q in powder coatings

UV-cured

Calcined product, methacrylic functionalized.

Aktifit Q is applicable in UV-cured powder coatings.

 

  • excellent dispersion properties
  • low abrasivity
  • good edge covering
  • scratch resistance
  • abrasion resistance
  • flexibility (Erichsen cupping, impact)
  • good corrosion protection, especially low delamination and rust creep
  • good chemical resistance, especially against hot water
  • improved hiding power or partial replacement of titanium dioxide
Product characteristics Unit AKTIFIT Q
Functionalization methacrylic
Color values L*
Color values a*
Color values b*
96.2
- 0.1
1.0
Particle size D50
Particle size D97
µm
2.3
11.0
Residue > 40 µm
mg/kg
20
Volatile matter at 105 °C % 0.2
Electrical conductivity µS/cm not applicable
Density
Bulk density
Tamped density
g/cm³
2.6
0.35
0.60
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
8
65
Hardness silica/kaolinite
mg
7/4.5
Refractive index n 1.55
Water solubility
Acid solubility
%
not applicable
not applicable
Chemical Analysis:
SiO2
Al2O3
Fe2O3
%
86
13
< 1
Mineralogical Composition:
Neuburg silica
Calcined kaolinite
%
60
40
Equilibrium moisture content at 25°C
and 50% relative humidity
and 80% relative humidity
and 90% relative humidity
%
0.04
0.06
0.07
Water absorption ml/g ≤ 0.1
hydrophobic X
reactive X

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products