Aktisil MAM in UV-curing coats

Methacryl functionalized based on Sillitin V 88.

Aktisil MAM offers low viscosity, good matting effect, good transparency and abrasion resistance.
During excimer curing the product leads to very homogeneous, matt surfaces with high polishing up (burnishing) resistance after scratch test (Martindale).

low sedimentation

no hard sediment

low abrasivity

scratch resistance

abrasion resistance

very good transparency

adjustable matting effect through choise of product

no effect on UV-curing

Product characteristics	Unit	Testing method	AKTISIL MAM
Functionalization			methacrylic
Color values L* Color values a* Color values b*		acc. to CIELAB	94.9 0.3 4.0
Particle size D₅₀ Particle size D₉₇	µm	acc. to ISO 13320-1	5.0 18.0
Residue > 40 µm	mg/kg	acc. to DIN EN ISO 787 part 18	30
Volatile matter at 105 °C	%	acc. to DIN EN ISO 787 part 2	0.2
Density Bulk density	g/cm³	acc. to DIN EN ISO 787 part 10 acc. to DIN ISO 903-1976	2.6 0.35
Spec. Surface area (BET) Oil absorption	m²/g g/100 g	acc. to DIN ISO 9277 acc. to DIN EN ISO 787 part 5	7 45
Water absorption	ml/g	acc. to Baumann	0.9
reactive			X

UV-curing transparent primer for wood, highly reactive, TSCA-approved, without reactive diluent (I45402.0 [1])

UV-curing transparent surfacer for wood, without reactive diluent (I45404.0 [1])

UV-curing transparent surfacer for wood, without reactive diluent (I45406.0 [1])

UV clear coat for Excimer curing (RRS 2214)

UV-curing transparent surfacer for wood, without monomeric reactive diluent (I45410.1)

UV-curing clear coat for wood, matte, with high abrasion resistance (I45411.2 [5])

UV-curing transparent primer for wood, highly reactive, without reactive diluent (I45401.0 [1])

UV-curing transparent topcoat for wood, without reactive diluent, matte (L00002.1)

Download all

Material Specification

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

Name	Short Description
SILLITIN V 88	Low viscosity, good matting effect, good transparency and abrasion resistance, also for excimer curing.
SILFIT Z 91	Similar to Sillitin V 88, but with highest color neutrality, best dispersion properties, higher viscosity at low shear rates, reduced sedimentation, higher gloss.
SILLITIN Z 89	Same as Sillitin V 88, but with lower color neutrality, higher viscosity, reduced sedimentation, for gloss formulations.
SILLITIN Z 89 puriss	Same as Sillitin Z 89, but with improved dispersion, for gloss formulations.
AKTISIL VM 56/89	Same as Sillitin Z 89, but with improved abrasion resistance.
AKTIFIT VM	Highest color neutrality, best dispersion properties, lower viscosity at low shear rates, improved abrasion resistance, improved hiding power without UV-curing problems.
AKTIFIT Q	Low viscosity, good matting effect, good transparency and abrasion resistance, also for excimer curing.

Aktisil MAM in UV-curing coats

Material Specification

Safety Data Sheet

More recommended Products

Aktisil MAM in UV-curing coats

lET'S STAY IN TOUCH