Peroxide
Amino functionalized based on Sillitin Z 86.
Aktisil AM offers high crosslinking speed, high tensile strength, high tensile modulus and good compression set according to the VW test standard. Aktisil AM also offers good hot air resistance, very good resistance to oil, good resistance to fuel and medium resistance to acetic acid with little alteration of the elongation at break.
- very low sieve residue
- good mixing and dispersion properties
- high tensile strength
- high abrasion resistance
- long flow time with short vulcanization time
- easy deflashing
- low compression set
- good resistance to substances (fuel, oil, water, acid)
- avoidance of mold fouling caused on dies caused by filler
| Product characteristics | Unit | Testing method | AKTISIL AM |
|---|---|---|---|
| Functionalization | amino | ||
|
Color values L*
Color values a*
Color values b*
|
acc. to CIELAB |
94.0
1.0
10.0
|
|
|
Particle size D50
Particle size D97
|
µm | acc. to ISO 13320-1 |
2.4
12.0
|
|
Residue > 40 µm
|
mg/kg | acc. to DIN EN ISO 787 part 18 |
30
|
| Volatile matter at 105 °C | % | acc. to DIN EN ISO 787 part 2 | 0.3 |
|
Density
Bulk density
|
g/cm³ |
acc. to DIN EN ISO 787 part 10
acc. to DIN ISO 903-1976
|
2.6
0.22
|
|
Spec. Surface area (BET)
Oil absorption
|
m²/g
g/100 g
|
acc. to DIN ISO 9277
acc. to DIN EN ISO 787 part 5
|
10
60
|
| Water absorption | ml/g | acc. to Baumann | not specified |
| reactive | X |
Peroxide
In order to make available to you the most important information about our products at all times, you will find here the Material Specification.
The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.
All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.