Javasript is currently not supported/disabled by this browser. Please enable JavaScript for full functionality.

Home
/ Industries
/ Elastomers
/ Machine and equipment construction
/ Hydraulic and fuel hoses

Hydraulic and fuel hoses

Benefits
Guide formulations

very good extrusion properties

high surface quality

high tensile modulus

low compression set

good resistance against fuels, oil, water, acid

avoids deposits on dies caused by filler

Peroxide

Neuburg Silliceous Earth as an acid resistant and tintable alternative to carbon black; 65 Shore A; FKM; peroxide cure (M 638.0/7) (M 638.0/8) (M 638.0/9) (M 638.0/10) (M 638.0/11) (M 638.0/5) (M 638.0/31)

Sulphur, metal-oxide

Fuel hose lining, black, antistatic; 70 Shore A; NBR; sulfur cure (6256.0/D-3)

Download all

Recommended Products

Sorted by crosslinking agent.

Name	Short Description
SILLITIN Z 86	Standard product.
SILFIT Z 91	Same as Z 86, but with avoidance of deposits on dies caused by filler, greater brightness and color neutrality, less moisture content, improved dispersion, slightly lower compression set.

Name	Short Description
AKTISIL PF 216	Same as Aktisil MM, but with highest tensile strength and tensile modulus, lowest compression set, best abrasion resistance, best chemical resistance.
AKTIFIT AM	Same as Silfit Z 91, but with higher tensile strength, higher tensile modulus, lower compression set, best abrasion resistance, improved resistance.

Name	Short Description
AKTISIL VM 56	Same as Sillitin Z 86, but with higher tensile strength, higher tensile modulus, lower compression set, better abrasion resistance, improved chemical resistance.
AKTISIL VM 56/89	Same as Aktisil VM 56, but for greater color neutrality requirements,offers slightly improved dispersion.
AKTISIL Q	Similar to Aktisil VM 56/89, but with less moisture content, lower viscosity, lower compression set, improved chemical resistance, best product for silicone rubber.
AKTIFIT VM	Same as Silfit Z 91, but with higher tensile strength, higher tensile modulus, lower compression set, better abrasion resistance, improved chemical resistance.
AKTIFIT Q	Same as Silfit Z 91, but with higher tensile strength, highest tension value and lowest compression set, better abrasion resistance, improved chemical resistance.

Name	Short Description
AKTISIL AM	Same as Silfit Z 91, but with higher tensile strength, higher tensile modulus, lower compression set, better abrasion resistance, improved chemical resistance.
AKTIFIT AM	Same as Aktisil AM, but improved dispersion.

lET'S STAY IN TOUCH

You do not receive any news from HOFFMANN MINERAL yet? We send out a quarterly newsletter with interesting and helpful information.
No spam. Only qualitative content. Promise!

SUBSCRIBE TO NEWSLETTER