Aktisil PF 216 in molded gaskets, o-rings and radial shaft seals

Sulphur, Metal-oxide

Tetrasulfan functionalized based on Sillitin Z 86.

Aktisil PF 216 offers highest tensile strength and tensile modulus as well as lowest compression set up to 100 °C, best abrasion resistance and best chemical resistances.

  • very low sieve residue
  • good mixing and dispersion properties
  • long flow time with short vulcanization time
  • easy deflashing
  • low compression set
  • good media resistance (fuel, oil, water, acid)
Product characteristics Unit AKTISIL PF 216
Functionalization tetrasulfane
Color values L*
Color values a*
Color values b*
94.0
1.0
10.0
Particle size D50
Particle size D97
µm
2.4
12.0
Residue > 40 µm
mg/kg
15
Volatile matter at 105 °C % 0.3
Density
Bulk density
g/cm³
2.6
0.25
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
10
60
Water absorption ml/g ≤ 0.1
hydrophobic X
reactive X

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products

Sorted by crosslinking agent.