Peroxide
Methacrylic functionalized based on Sillitin V 901
1(internal product quality)
Aktisil Q offers best compression set in the unconditioned state, hot air resistance with positive change in tensile strength and elongation at break, better resistance to oil as well as resistance to acetic acid with minimium changes in tensile strength and elongation at break.
- very low sieve residue
- good mixing and dispersion properties
- high tensile strength
- high abrasion resistance
- long flow time with short vulcanization time
- easy deflashing
- low compression set
- good resistance to substances (fuel, oil, water, acid)
- avoidance of mold fouling caused on dies caused by filler
| Product characteristics | Unit | Testing method | AKTISIL Q |
|---|---|---|---|
| Functionalization | methacrylic | ||
|
Color values L*
Color values a*
Color values b*
|
acc. to CIELAB |
94.5
0.3
4.0
|
|
|
Particle size D50
Particle size D97
|
µm | acc. to ISO 13320-1 |
5.0
18.0
|
|
Residue > 40 µm
|
mg/kg | acc. to DIN EN ISO 787 part 18 |
25
|
| Volatile matter at 105 °C | % | acc. to DIN EN ISO 787 part 2 | 0.3 |
|
Density
Bulk density
|
g/cm³ |
acc. to DIN EN ISO 787 part 10
acc. to DIN ISO 903-1976
|
2.6
0.45
|
|
Spec. Surface area (BET)
Oil absorption
|
m²/g
g/100 g
|
acc. to DIN ISO 9277
acc. to DIN EN ISO 787 part 5
|
6
43
|
| Water absorption | ml/g | acc. to Baumann | 0.5 |
| reactive | X |
Peroxide
In order to make available to you the most important information about our products at all times, you will find here the Material Specification.
The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.
All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.