Aktifit AM in filament printings of ABS, FFF process

Calcined product, amino functionalized.

Aktifit AM is applicable for higher requirement to impact strength and offers low warping and good mechanical properties.

 

  • easy handling during compounding (low dust, easily dispersible)
  • faster print speed
  • comparable layer adhesion as unfilled ABS
  • reduced warpage of the component
  • very good mechanical properties
  • lower printing temperature enables processing even on printer without heated build chamber/print bed
Product characteristics Unit AKTIFIT AM
Functionalization amino
Color values L*
Color values a*
Color values b*
96.2
- 0.1
1.0
Particle size D50
Particle size D97
µm
2.3
11.0
Residue > 40 µm
mg/kg
10
Volatile matter at 105 °C % 0.2
Density
Bulk density
Tamped density
g/cm³
2.6
0.31
0.55
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
9
65
Hardness silica/kaolinite
mg
7/4.5
Refractive index n 1.55
Water solubility
Acid solubility
%
< 0.5
< 1
Chemical Analysis:
SiO2
Al2O3
Fe2O3
%
86
13
< 1
Mineralogical Composition:
Neuburg silica
Calcined kaolinite
%
60
40
Equilibrium moisture content at 25°C
and 50% relative humidity
and 80% relative humidity
and 90% relative humidity
%
0.11
0.29
0.55
Water absorption ml/g not specified
reactive X

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products